Sangean REVERY R4 WFS-58, Руководство пользователя

Страница: 81 / 87

80
Software update
From time to time, new software features for your radio may be developed. Your radio has therefore
been designed to allow its internal software to be updated using your Internet connection.
You should not attempt to update your radio unless it is recommended to you by Sangean Customer
Services. Updating the software may remove all network settings, radio station presets and alarm
settings from your radio.
It is important that you do not attempt this procedure unless you have a good Internet connection and
a reliable mains power supply. If the radio connects to your router using a WiFi connection, make sure
that this is also reliable before proceeding.
1. The 'Software update' option is accessed via the System Settings menu. When you select 'Software
update' the menu will display 'Auto check setting' and 'Check now'. If you want your radio to check
periodically for new software versions press the Menu Up or Down buttons to highlight 'Auto check
settings'. Then press and release the Select button and select 'YES'. If you do not want your radio
to check for updates select the 'NO’ option.
2. To check if there are any software updates available currently, press the Menu Up or Down buttons
to highlight 'Check now' and then press and release the Select button. The radio will check to see
if an update is available. The display will show 'Checking for new versions'. If there are no updates
then the display will show 'Software up to date'. If a software update is available your radio will
then offer the choice of updating the software or not, displaying 'New version available. Update
software?'. Select the 'YES' option if you wish to go through the update process.
3. If you choose to update your radio it will first download the new software and will then reprogram
its internal memory. This may take anything from a few seconds to a few minutes depending on the
speed of your internet connection.
4. Once the software update is completed, the radio will prompt you to press Select to restart. Press
and release the Select button and your radio will then restart. You may find that you will need to
reconfigure your network connection following an update. You may also need to re-enter all radio
station presets, alarm settings, and configuration options.
VERY IMPORTANT:
Do not switch off the power to the radio until the update operation is complete
and the radio has restarted, otherwise the unit may become permanently damaged.
Loudness
Inactive Standby
Language
Factory reset
Software update
System settings
>
>
>
Auto-check setting
Check now
Software update
Auto-check setting
Check now
Software update
Bluetooth
AUX-IN
Sleep
Alarms
System settings
Main menu
>
Check periodically for
new versions?
Software update