Sangean REVERY R4 WFS-58, Руководство пользователя

Страница: 79 / 87

78
Auxiliary input socket
A 3.5mm Auxiliary Input socket located on the rear of your radio is provided for connecting the audio
signal from an external audio source such as an MP3 or CD player.
1. Connect a stereo lead from the headphone output of your MP3 or CD player to the Aux In socket
located at the rear of the radio. Typically this lead will have a 3.5mm stereo plug at both ends.
2. Switch on your radio.
3. Press and release the Band button and then use the Menu Up or Down and Select buttons to select
the ‘AUX-IN’ mode.
4. Press the 'play' on the connected audio device. If you are using its headphone output for the
connection, set its volume control to a level of somewhere between two-thirds and maximum (the
objective is to get a strong audio signal but without too much distortion). Then adjust the volume on
the radio as required.
Note:
If using an iPod as the sound source, you may need to set its output to maximum to get an adequate
audio signal level.
5. After use, disconnect your player in order to listen to your radio conventionally.
Aux in
AUX