Sangean REVERY R4 WFS-58, Руководство пользователя

Страница: 45 / 87

44
Set up UPnP access on a Windows PC - cont.
4. Press the Menu Up or Down buttons until ‘Shared media' is highlighted and press the Select button
to select. The radio will scan for all available UPnP servers. It may take a few seconds for the radio
to complete its scan. The radio will display ‘<Empty>' if no UPnP servers are found.
5. After scanning, select your UPnP server using the Menu Up or Down and Select buttons. If you
allowed automatic connection previously, your radio should now connect and you may skip to
the next page. If you did not permit automatic connections, your radio will then normally display
'Unauthorised' at this stage.
6. Your PC may prompt you that there has been a connection to your UPnP server. Whether prompted
or not, in order that the radio may access the music files, you will need to click the 'Library' tab in
WMP 12 and select the 'Stream…' item to open the 'Media Streaming' window. Select 'Automatically
allow devices to play my media' then select 'Automatically allow all computer and media devices'.
Alternatively select 'More Streaming options' to enable sharing on a 'per device' basis.
7. In the ‘More streaming options' window, the radio may be listed as a blocked device. Click on the
button shown to select 'Allowed'.
Note: If you are using Microsoft's Windows' firewall software, this should be correctly configured by
WMP 12. If you are using third party firewall software you may need to manually configure it to allow
your unit and WMP 12 to communicate.
8. On the radio, select the named server again using the Menu Up or Down and Select buttons.
If WMP 12 is now able to communicate with your radio you will be presented with some media
selection options on the display.
Shared media
My playlist
Repeat play: Off
Shuffle play: Off
Clear My playlist
Music player
>
>
JENNY: Jenny’s music
HOME_PC: Mum’s music
Shared media
>
>
7
Sangean WFS-58 00226125e0e8
Jim
Allowing a device to connect to Windows Media Player 12