36
Dynamic Range Control settings
Dynamic Range Control (also known as DRC) can make quieter sounds easier to hear when your
radio is used in a noisy environment by reducing the dynamic range of the audio signal.
1. Press the On/Standby button to switch on your radio.
2. Press and release the Band button as needed and then use the Menu Up or Down and Select
buttons to select the DAB Radio mode.
3. Press and hold the Menu button to enter the DAB menu.
4. Press the Menu Up or Down buttons until 'DRC' is highlighted on the display.
5. Press and release the Select button to enter the DRC adjustment mode. The current DRC setting
will be indicated with an asterisk.
6. Press the Menu Up or Down buttons to highlight the required DRC setting (the default is Off).
'DRC Off' - DRC is switched off, Broadcast DRC will be ignored.
'DRC high' - DRC is set as sent by broadcaster.
'DRC low' - DRC level is set to 1/2 that sent by broadcaster.
7.
Press and release the Select button to confirm the setting.
Note:
Not all DAB broadcasts use the DRC function. If the broadcast does not provide DRC
information, then the DRC setting in the radio will have no effect.
Station order setup
Your radio has 3 station order settings from which you can choose. The station order settings are,
alphanumeric, ensemble and valid.
Note:
The default station order on your radio is alphanumeric.
1. Press the On/Standby button to switch on your radio.
2. Press and release the Band button as needed and then use the Menu Up or Down and Select
buttons to select the DAB Radio mode.
3. Press and hold the Menu button to enter the DAB menu list.
4. Press the Menu Up or Down buttons until 'Station order' is highlighted. Press the Select button to
enter the station order adjustment mode.
5. Press the Menu Up or Down buttons to choose between 'Alphanumeric', 'Ensemble' and 'Valid'.
‘Alphanumeric' - sorts the station list alpha-numerically 0...9 A...Z. 'Ensemble' - organizes the station
list by DAB multiplex.
'Valid' - shows only those stations for which a signal can be found. The current setting is indicated
by an asterisk.
6. Press and release the Select button to select the required station order.
7. Press the Back button as needed to return to the DAB menu or to the stations list.
DAB
radio
DAB Radio
Station list
Scan
Manual tune
Prune
DRC
DAB
>
>
>
DRC high
DRC low
DRC off
DRC
*
DAB
radio
DAB Radio
DAB
Scan
Manual tune
Prune
DRC
Station order
>
>
Alphanumeric
Ensemble
Valid
Station order
*
Содержание REVERY R4 WFS-58
Страница 1: ...Version 1 REVERY R4 WFS 58 GB...