Sangean REVERY R4 WFS-58, Руководство пользователя

Страница: 36 / 87

35
GB
Finding new DAB radio stations
Should you wish to use your radio for DAB reception in a new location, or if no stations were detected
during the initial scan, you can follow this procedure to allow your radio to find out which DAB radio
stations are available.
1. Ensure that the telescopic antenna is extended and press the On/Standby button to switch on the
radio.
2. Press and release the Band button as needed and then use the Menu Up or Down and Select
buttons to select the DAB Radio mode.
3. Once in DAB mode press and hold the Menu button.
4. Press the Menu Up or Down buttons until 'Scan' is highlighted on the display.
5. Press and release the Select button to initiate the scan. The display will show 'Scanning' and your
radio will perform a scan of the Band III DAB frequencies. As new stations are found the station
counter will increase and stations will be added to the list. The bar graph indicates the progress of
the scan.
6. Alternatively press the Auto Tune button on the radio to initiate a scan of the DAB Band III
frequencies. The Auto Tune button may not operate in all display modes. In this case use the menu
option above.
Manual Tuning
Manual tuning allows you to tune directly to the various Band III DAB channels (5A to 13F).
1. When in DAB mode press and hold the Menu button so that the display shows the DAB menu.
2. Press the Menu Up or Down buttons until 'Manual tune' is highlighted.
3. Press and release the Select button to enter manual tune mode.
4. Press the Menu Up or Down buttons to choose the required DAB channel.
5. Press and release the Select button to cause the radio to tune to the chosen channel. When the
radio has tuned, the display shows the channel number and frequency, and the name of the DAB
multiplex found (if any). A bar graph shows the signal strength and is useful if you need to reposition
the radio. The minimum signal marker 'I' which separates the left and right parts of the signal graph
shows the minimum signal level required for satisfactory reception. Any new radio stations found on
the tuned DAB multiplex will be added to the list stored in the radio.
6. Press the Back button to choose a different frequency.
7. Press the Back button a second time to access the main DAB menu then select 'Station list' to
return to normal tuning.
Station list
Scan
Manual tune
Prune invalid
DRC
DAB
>
>
>
Scan
Stations: 24
Scanning
/
DAB
Heart
11C 220.352 MHz
Strength:
12:34
DAB Radio
Station list
Scan
Manual tune
Prune
DRC
DAB
>
>
>
11B 218.640 MHz
11C 220.352 MHz
11D 222.064 MHz
12A 223.936 MHz
12B 225.648 MHz
Manual tune