18
-
.5.2. ASSEMBLING FLEXIBLE CONNECTIONS
• If you have ordered flexible connections for the ends of the units, they will be supplied
separately.
7.5.1. ADDITIONAL FILTERS MOUNTING
The air conditioner is supplied with a fi lter mounted inside. Depending on the version it is
possible to mount a second fi lter (order as accessory).
To mount the fi lters follow the following sequence:
The module frames have mounting brackets on each corner that are used to secure the
equipment to the ceiling and to join the various modules to one another. If the unit is made
up of different modules, it will be supplied with a joining kit with 4 sets of bolts, washers,
nuts and a sealing gasket.
1. Loosen the closure
that holds the
panel of fi lter
access
2. Pull the handle
to access the unit
internally
3. Remove the lateral
support and release
the fi lters via the
interior handle (b)
4. Extract the fi lter/s
a
b
Содержание UTBS PRO-REG Series
