S&P UTBS PRO-REG Series, Руководство пользователя

Страница: 20 / 72

20
Both the damper module and the corresponding servomotors are supplied as accessories.
The installer should mount the damper module, using the supplied hardware with this.
Mount the servomotor on the damper shaft.
After mounting the servomotor, make the electrical connection to the electrical cabinet
according the electrical diagram.
Check that the actuator sense of rotation is correct (once the unit is stopped the damper
must be closed). If it is necessary, modify the damper rotation sense via the selector in the
frontal of the actuator
• Air
(
inlet section:
>i^
s sent with a fixed position of the dampers. If not coincide with the
needs of the installation, change the frontal panel as shown.