S&C Vista SD, Программирование

Страница: 24 / 34

Appendix B
Communication
Parameters
NOTICE
Before using any Microsoft terminal-emulator program, disable any PDA synchronizing
software programs . Failure to do so may cause communication problems when connecting
to the S&C Overcurrent Control .
HyperTerminal
Parameter Setting
Baud Rate 9600
Parity None
Data Bits 8
Stop Bits 1
Flow Control
XON/XOFF
▲
▲
The overcurrent control does not use hardware flow control (RTS, CTS) .
AcSELerator Quickset SEL-5030
Parameter Setting
Device ★
Data Speed 9600
Data Bits 8
Stop Bits 1
Parity None
RTS/CTS OFF
DRT ON
RST ON
★
Specify the assigned COM # from the drop down list . The assigned COM # can be found under Control Panel,
System, Hardware, Device Manager . Expand the Ports menu . The COM # will be adjacent to “SEL to UART
Bridge Controller .”
24 S&C Instruction Sheet 695-515