4 S&C Instruction Sheet 1041-540
Safety Precautions
DANGER
The 5800 Series Automatic Switch Control line voltage input range is 93 to
276 Vac. Failure to observe the precautions below will result in serious per-
sonal injury or death.
Some of these precautions may differ from your company’s operating procedures
and rules . Where a discrepancy exists, follow your company’s operating procedures
and rules .
1 .
QUALIFIED PERSONS. Access to the 5800 Series
Automatic Switch Control must be restricted only to
qualified persons . See the “Qualified Persons”
section on page 2 .
2 .
SAFETY PROCEDURES. Always follow safe
operating procedures and rules .
3 .
PERSONAL PROTECTIVE EQUIPMENT. Always
use suitable protective equipment, such as rubber
gloves, rubber mats, hard hats, safety glasses, and
flash clothing, in accordance with safe operating
procedures and rules .
4 .
SAFETY LABELS. Do not remove or obscure any
of the “DANGER,” “WARNING,” “CAUTION,” or
“NOTICE” labels .
5 .
MAINTAINING PROPER CLEARANCE. Always
maintain proper clearance from energized
components .
