Sana EUJ-828, Руководство пользователя

Страница: 18 / 26

16
Cleaning the parts
When you clean the juicing chamber, wash the
inside and bottom of the chamber under running water to
remove all pulp residue.
The chamber gasket can't be removed. Do not
attempt to remove it. Trying to remove the juicing
chamber gasket may damage it and cause leaks.
How to clean
Unplug the power cord with dry hands after the unit
has completely stopped.
Remove the juicing chamber from the main body.
Twist the chamber cover to open and lift up the
parts in order to disassemble the unit.
Using the cleaning brush, wash the parts under
running water.
Open the control lever [OPEN
◯
] and juice cap to
wash the chamber.
Wipe the main body with a damp towel or a soft
cloth.
The silicon rotating brush blades and juice cap seal
can be removed and cleaned individually.
You can sterilize the parts by soaking them for 30
minutes in a solution of water mixed with baking
soda, citric acid, or vinegar.
01
02
03
04
05
06
07
If the unit is not cleaned immediately after use, a residue may form and stick to the unit. This
will make disassembling and cleaning difficult as well as lead to performance degradation.
Do not wash any parts with hot or boiling water, an abrasive pad or sponge, sink solvents, or
sharp cleaning tools. Do not wash any parts in a dishwasher. After washing, hand dry it with
a towel and allow it to air dry.
Note
Chamber
gasket