Sana EUJ-828, Руководство пользователя, Страница: 20 / 26

17
Silicone brush
1
2
3
Open the juice cap, hold the juicing chamber and juice
cap with one hand, and remove the juice cap gasket
with your other hand. Wash with warm soapy water.
Please be careful not to drop or damage the juice
cap and juicing chamber when disassembling the unit.
Push the mid gear from the bottom side of the
juicing chamber to remove it.
Slide it back in from the top after washing it.
J
uice cap gasket
Mid gear
How to clean
Remove the silicone brush from the rotating brush holder.
Hold the rotating brush holder with one hand, then slowly
pull off the brush blade. Begin at the top of the blade and
pull outward and down.
Use the cleaning brush and wash the inside and outside of
the rotating brush holder under running water.
Wash the silicone brush blade under running water. Use
the brush to dislodge any particles in the groove of the
blade.
After cleaning, attach the silicone brush by pushing on the
back of the brush holder
❶
while pulling the inner wing
inward with your other hand as shown in the picture. Pull until
it cannot be pulled any further.
❷
Grab the top and bottom of
the outer wing and pull them tight.
If the silicone brush blades aren't properly assembled, they could
come off during juicing or will clean less effectively.
❶
❷