![background image](http://html.mh-extra.com/html/sana/euj-828/euj-828_user-manual_806732023.webp)
20
Make sure that the power cord is properly plugged in. Check that the hopper is assembled properly.
The appliance may not operate when used for more than 30 minutes. In this case, let the machine cool
off at least 5 minutes. If the hopper has not been properly locked into place, the appliance will not
operate for safety reasons.
Check if the appliance has been assembled according to the directions in the manual.
Refer to instructions for assembly in the manual or consult with your Customer Service Center for
additional assistance.
04 The appliance stops during normal operation.
Is the juicer overloaded, especially with solid ingredients like beets or carrots?
Refer to page 19 of the manual and follow the guidelines for using [REV] button. If the issue is not
resolved after following the above process, please contact your local Customer Service Center.
05 There are fine lines or scratch marks on the auger.
These are molding marks resulting from the normal manufacturing process. This is normal and does
not affect the operation of the juicer.
06 Chamber set does not fit into the base.
If the lever is in OPEN
◯
position, the juicing chamber set will not fit in the base.
Before assembling, set the lever to the
CLOSE position.
01 The main body will not work by itself.
For your safety, this unit only works when
main body is correctly assembled with the
juicing chamber set.
03 The juicer does not turn on.
02 Please make sure the line on the
hopper is properly aligned with the body
For your safety, this juicer will only operate
when the hopper is properly aligned. Note that it
can be aligned in two directions.
Before requesting a repair
Содержание EUJ-828
Страница 1: ...USER MANUAL SANA JUICER EUJ 828 ...
Страница 2: ......
Страница 19: ......
Страница 26: ...www sanaproducts eu The future of your healthy kitchen 4DC010680_V 01 ...