background image

 

 

14 

 

4.3.4. Gain Control 

 
 

 
 

 
 
 

 

(1) How to control Gain Control 

 Turn 

  to the left to decrease the Gain and to the right to increase the Gain. 

(2) To adjust the optimum gain 

 The echo image size by target is the biggest and any targets nearby do not contact the echo image. 

감도가 낮아 영상이 작다.

감도가 최적이다.

감도가 높아 2개의

영상이 붙었다.

 

4.3.5. Rain/Snow Removal 

 
 

 
 

 
 
 

 
(1)

 

If  much  rain/snow,  it  is  difficult  to  analyze  the  wishful  target  image  as  the  echo  by  rain/snow  clutter 

appears on the PPI display. 
(2) Turn 

(rain/snow) to the right to remove the echo image by snow and rain. 

                   

 

                      

Reflected Wave of Rain/Snow

                                     

Removed Rain/Snow   

                                                                                                                      (Target Retricted, too) 

ATTENTION

 

 It should be always observed by adjusting the optimum conditions. 

 If the gain is too low, the targets may not be displayed. 

 If too high, it may be an obstacle in observation due to the noise increase on the 

PPI display.

 

ATTENTION

 

  Too  much  adjustment  of  rain/snow  removal  will  restrain  the  target  of  ships  or 

hazards  as  well  as  any  images  by  rain/snow.  This  can  be  the  cause  of  image 
analysis. 

 In case of use of rain/snow removal, the optimum conditions should always set up.

 

Small Imge by Low Gain 

Optimum Gain 

2- images contact   

by high gain 

Содержание SMR-3700







































Отзывы: