31
6.6.5. DISPLAY TIMING (0 Mile Set)
(1) An adjust to fix a real distance and target
distance of the PPI screen. (In a transmitting)
(2) If the real distance is 0.2NM for non-moving
target, while the PPI target is marked on 0.18NM,
adgust it as followings.
Set to 0.25NM for distance range.
Select 1 EBL/VRM
function.
(Function to measure distance / bearing
for targets)
Set VRM to 0.2NM.
Menu screen.
Move to
INIT. SET
Push bottons one after another,
It is displayed additional menu
out of default(settion) menu.
Move to
DISPLAY TIMING
,
Select, PPI screen comes up and
displayed number in the
middle
of
top screen.
Adjust the target of waypoint to
reach at the real distance (0.2NM),
VRM position.
[ Ref. ]
☞
Adjust Range : 000 ~ 255
:
1 Step Adjust
: 10 Step Adjust
If the compensated values are increased, the
distance for target is closer from own ship.
Set by adjusted value which has
been completed.
Return to ordinary PPI screen.
0.125
0.25
CAUTION
※
The adjust was set when it is supplied
from a manufacturer and if adjusted
unnecessarily, the distance error may
be taken place.
※
This set value is set as 006 when
it is delivered from factory.