Samyung SMR-3700, Руководство пользователя

Страница: 13 / 38

13
Chapter 4. How to operate the unit
4.1. General Idea
4.1.1. Power Input and Operation
(1) Power Input
a) To power on, press button.
b) Afte power on, Count Down Timer is displayed
on SAMYUNG Logo screen, it is converted to
the stand-by in 1 min. 30 secs.
c) As the TX time is consolidated and displayed,
user can judge the ideal time for repair.
d) It indicates the version of the program.
(2) TX
a) Press button to enable the transmission
at the stand-by status.
b) Press
button again to convert the TX
status to the stand-by status.
4.1.2. Tuning Control
 It is required to control the tuning of the unit both
manually and automatically.
The conversion is selectable in the setup of MENU.
For the automatica tuning, “ A ” is displayed next to
the tuning bar.
(1) Conversion of Tuning Mode
Menu screen
Move to
RADAR SET-UP
, Move to
TUNING MODE
, press
, Move to
Auto / Manual, press
Back to PPI screen
(2) Adjustment of Tuning Volume
a) In case of tha manual tuning mode, turn the
volume to adjust the image biggest.
b) Adjust the movement of the tuning bar biggest.
c) In case of the automatic tuning mode, it is
needless to turn the volume.
d) If any image doesn’t appear, adjust the
volume again or turn the volume of
/
(rain/snow) removal.
4.1.3. Image Control
a) the volume of the tuning/gain of
(sea clutter), (rain/snow),
removal to display the optimum image.
b) Press
button to convert the
processing range of the image.
4.1.4. Power Off
(1) TX stop.
 Press
button to convert to the stand-by
status.
(2) Turn off the power.
 Press and hold on button for 1~2 secs, the
radar operation will stop and all the performances
will stop, too.
4.2. Stand-by for Processing
4.2.1. Brightness Change
a) Press button, the screen will get brighter.
b) press button to have the darker screen.
[ Ref. ]
☞
There are 10 (ten) stages adjustable in
the brightness.
4.2.2. Language Selection
Menu screen
Move to
INIT. SET
, Move to
LANGUAGE SET
,
KOR / ENG / RUS / CHI / ITA,
press
Back to PPI screen
4.3 Basic Operation
4.3.1. TX
 Press
button, it will be converted to TX
from the stand-by status.
4.3.2. TX Stop
 Perss button again at the TX, it will be the
stand-by status.
4.3.3. Tuning Control
 Please refer to ‘4.1.2, Tuning Control’.