Samyung BNW - 50, Руководство пользователя

Страница: 3 / 64

3
CAUTION
1. This BNWAS can be switched ON/OFF or settings can be changed with password, therefore only
authorized person (captain) can change or switch ON/OFF the BNWAS.
2. Before operating the machinery, you must read and be fully aware of the safety signs and the
guidelines.
3. In case of machine breakdown due to the heat exposure or use of faulty power cable which can
cause a serious damage, is not covered by A/S.
4. Please do not disassemble the equipment since it is equipped with electric circuit that can be
only handled by experienced technician. Exposure of the display screen to the UV light may
cause life-shortening of the LCD. Avoid overheating LCD by adjusting the contrast except for
the extreme dark display. The problem caused by the overheating may not be solved after the
temperature has been cooled down
SIGN DESCRIPTION
The PCB used in this equipment is produced under protected
environment of electrostatic discharge.
This is because the most of the semiconductor equipment used
in the PCB can be damaged easily by the electrostatic discharge.
!
You must prevent from damaging the equipment when
operating, as it can be easily damaged by the electrostatic
discharge.
Only experienced technician must work on the circuit of the
equipment as it is sensitive to electrostatic discharge.
Disassemble of this equipment is only allowed to the
technician authorized by our company.
Cleaning of the display screen
The surface of the screen is coated with non-reflective material, therefore it is important to clean and
take meticulous care when cleaning. Please follow the instructions below.
Use the cleaning spray (same as computer monitor), microfiber. Fold the tissue or the microfiber
three times, and wet the edge of the fiber with the spray. Use your index finger to wipe the monitor.
The screen may get damaged if the tissue is not wet enough.
When you require technical assistance, please contact the nearest SAMYUNGENC Store or the A/S
center.