Samsung TECHWIN SAMS Pro Скачать руководство пользователя страница 103

Страница: 103 / 202

English Englis_

English

_103

VIDEO MONITORING

Any connected recorder will highlight the recorder name in blue; if not connected, the recorder will be marked in red.

Select a camera whose live video you want to watch, and right-click it to select Live in the context menu or
simply double-click it.

CONFIGURING THE LIVE SCREEN

(



This is not available in SAMS Pro Lite.)

SRN-47X_192. 168.1.198:554-Cam01
2013-04-23 09:58:31

21 / 04 / 2013

21 / 04 / 2013
09 : 52 : 27

09 : 52 : 27

The live screen for simple monitoring will display the camera name in the message box while the live screen for an event will

display the camera name, event name and occurrence time and date.

This is the camera name that you provided in [Camera Settings].

This is a live screen where camera channels and time and date information are shown.

A collection of direction buttons.

Button that enlarges the image (Zoom In).

Button that shrinks the image (Zoom Out).

Iris In button.

Iris Out button.

Preset button.

Scan button.

Autopan button.

Pattern button.

Depending on the relevant device, some functions may be limited. For further information, refer to the corresponding

device’s manual.



10.

11.



Содержание TECHWIN SAMS Pro











































































































































































































Результаты поиска

Содержание TECHWIN SAMS Pro

Отзывы:

Похожие инструкции для TECHWIN SAMS Pro

Бренды по названию

Популярные бренды

Samsung TECHWIN SAMS Pro, Руководство пользователя

Результаты поиска

Содержание TECHWIN SAMS Pro

Отзывы:

Похожие инструкции для TECHWIN SAMS Pro

Бренды по названию

Популярные бренды