overview
8_ overview
AT A GLAnCe
Appearance
Item
Description
a
PoE Connector
Connects to the network and supplies power through Ethernet cable.
b
Audio In Jack
SNV-L6013R
Used to connect to a microphone. (black)
SNV-L6014RM Used to connect to a microphone. (pink)
c
Dome Cover
Dome cover for the lens and unit protection.
d
M12 Female connector
cable
Connect to the M12 Male connector cable for power supply and network connections.
e
Audio Out Jack
Used to connect to speakers. (green)
M
`
Wipe out a dirty surface of the lens softly with a lens tissue or cloth to which you have applied ethanol.
inside
Item
Description
a
Lens Cover
Used for protecting and fixing the lens.
b
Fixing Hole
Hole used for securing the camera on a ceiling.
c
Reset Button
Resets the camera settings to the default. Press and hold for about 5 seconds to reboot the
system.
J
If you reset the camera, the network settings will be adjusted so that DHCP can be
enabled. If there is no DHCP server in the network, you must run the IP Installer
program to change the basic network settings such as IP address, Subnet mask,
Gateway, etc., before you can connect to the network.
d
Microphone hole
A microphone is embedded.
`
It is applicable only to the SNV-L6014RM model.
e
Micro SD Memory Card
Compartment
Compartment for the Micro SD memory card.
f
IR LED
These infrared LED’s are controlled by the illumination sensor.
g
Illumination Sensor
Detects incoming light to control the IR LED.
RESET
a
c
d
b
g
f
e
RESET
<SNV-L6013R>
<SNV-L6014RM>
RESET
d
e
b
c
a
b
c
