setup screen
30_ setup screen
ip & port
1.
From the Setup menu, select the <
Basic ( )
> tab.
2.
Click <
ip & port
>.
3.
Set the <
ipv4 setup
>.
•
IP type : Select an IP connection type.
- Manual : Specify the IP address, Subnet mask,
Gateway, DNS1, and DNS2.
- DHCP : Specify the DNS1 and DNS2.
- PPPoE : Specify the DNS1, DNS2, ID and Password.
`
If you set it to <
Manual
>, you should specify the IP, Subnet mask,
Gateway, DNS 1 & 2 manually.
•
MAC address : Shows the MAC address.
•
IP address : Displays the current IP address.
•
Subnet mask : Displays the <
Subnet mask
> for the set IP.
•
Gateway : Displays the <
Gateway
> for the set IP.
•
DNS1/DNS2 : Displays the DNS(Domain Name Service) server address.
4.
Set the <
ipv6 setup
>.
`
Set to <
Use
> to use IPv6 address.
•
Default : Use the default IPv6 address.
•
DHCP : Display and use the IPv6 address obtained from the DHCP server.
•
Manual : Enter IP address and gateway manually and use it.
J
`
The IP addressing system will be defaulted to DHCP. If no DHCP server is found, the previous settings will be restored
automatically.
`
Once completed with editing, click [
Apply
(
)
] to apply changes and the browser exits. After a while, connect again
with the changed IP.
5.
Type in each item in the Port menu as necessary.
`
Neither the port range between 0 and 1023 nor port 3702 is available.
•
HTTP : HTTP port used to access the camera via the web browser.
The default is 80(TCP).
`
Setting the HTTP port for Safari and Google Chrome browsers to 65535 is not allowed by security policy.
•
HTTPS : In this version, the security of the web communication protocol HTTP is strengthened. It can
be used when you set HTTPS mode in SSL.
The initial value is set to 443(TCP).
`
The available setting range is 1024~65535. (For security reasons, in your Safari or Google Chrome browser, you may not use
65535 as your HTTPS port.)
•
RTSP : Used to transfer videos in the RTSP mode; the default is 554.
•
Use timeout : When connecting to RTSP, this function resets the connection if there’s no response for a
certain time.
•
Device port : Set a port used to transfer video signals with the Samsung protocols.
M
`
If changed the HTTP port, the browser exits.
Afterwards, address should contain the newly assigned HTTP port trailing the IP.
ex) IP address: 192.168.1.100, HTTP port : Assigned 8080
http://192.168.1.100:8080
(If HTTP port is set to 80, no need to specify the port number)
`
Using RTSP and HTTPS is recommended in order to prevent the image information from being restored.
6.
When done, click [
Apply (
)
].
event setup
You can easily set the event detection items, and move to the detailed setting.
1.
From the Setup menu, select the <
Basic ( )
> tab.
2.
Click <
event setup
>.
3.
Activate desired items on the Event list.
4.
When done, click [
Apply (
)
].
M
`
To make detailed event settings, click on your desired settings. Go to
detailed <
Event
> setting.
