Samsung SNR-1162, Руководство пользователя

Страница: 54 / 110

54_ confi guration mode
confi guration mode
Click < Linked alarm >.
Select an alarm to be linked with the sensor.
All Alarm: Select all alarms.
Reset: Deselect all selected alarms.
Cancel: Exit without saving the settings.
Select an alarm to be linked with the sensor.
You can select one or more alarms.
Click < OK >.
The alarm number linked with the sensor is displayed.
Select input type of each sensor.
Available options
NO (Normal Open): The sensor is normally in open state and turns to close state if a signal is input.
NC (Normal Close): The alarm is normally in close state and turns to open state if a signal is input.
To apply the settings to all the sensors, click < All > and select setting values.
If the sensor is activated, the screen is displayed in the selected screen layout.
Set up the other sensors by repeating Step 2 ~ 6 above.
Alarm Setup
You can set up alarms.
Click < Alarm > tab.
Enter the name of each alarm.
Select input type of each alarm.
Available options
NO (Normal Open): The alarm is normally in open state and
turns to close state if a signal is input.
NC (Normal Close): The alarm is normally in close state and
turns to open state if a signal is input.
To apply the alarm type to all the alarms, click < All > and select setting values.
Set the duration of alarm operation.
Available options
1 Time: The alarm operates once.
5 Sec. ~ 10 Min.: The alarm operates for the specifi ed period of time.
Continue: The alarm operates until it is stopped.
If you want to set the same activation time for all alarms, click < All > to select an activation time.
4.
•
•
•
1)
2)
5.
•
•
J

6.
7.
1.
2.
3.
•
•
J

4.
•
•
•
J

① ②
③ ④
02093A-SNR-1162-ENG.indb 54 02093A-SNR-1162-ENG.indb 54 2008-11-07 오후 2:32:27 2008-11-07 오후 2:32:27