Samsung SNC-C7478 Скачать руководство пользователя страница 67 | Manualshive

Страница: 67 / 72

background image

English –

67

appendix

TROUBLESHOOTING

PROBLEM

SOLUTION

I can’t access the camera from a
web browser.

• Check to make sure that the camera’s Network settings are appropriate.

• Check to make sure that all network cables have been connected properly.

• If connected using DHCP, verify that the camera is able to acquire dynamic IP addresses

without any problem.

• If connected using a DDNS URL, verify that the MAC address has been properly entered.

• If the camera is connected to an xDSL network, ensure that Bandwidth is set to less than

600Kbps. Because xDSL offers slow connection speed, setting Bandwidth high results in
network load and hinder network connection.

• If the camera is connected to a router, verify that port forwarding is properly confi gured.

Viewer got disconnected during
monitoring.

• Connected Viewers become disconnected upon any change to camera or network confi gurations.

• Check all network connections.

• If the camera is connected over an xDSL network, it’s possible for Viewer to disconnect

under poor network conditions.

I cannot connect to the system
using a tab browser of Internet
Explorer 7.0.

• When you try to connect to the system using a tab browser, the same cookie information is

shared, resulting in errors when connected. Therefore, instead of using a tab browser, open
a new browser window to connect to the system.

The camera connected to the
network is not detected in the IP
installer program.

• Turn off the fi rewall settings on your PC and then search the camera again.

Images overlap.

• Check whether two or more cameras are set to a single multicast address instead of different

addresses. If a single address is used for multiple cameras, the images may overlap.

No image appears.

• If the transmission method is set to multicast, check whether there is a router that supports

multicast in the LAN the camera is connected to.

I enabled Motion Detection Feature
under Motion Detection, but .jpg
fi les are not getting sent over FTP/
SMTP even after motion detection
occurs at the camera.

• Verify the settings in the following sequence:

A. NTP must be properly confi gured.
B. Motion Detection Feature must be enabled.
C. Alarm Video Transmission must be enabled.
D. Check for scheduling confl ict.

Is it possible to confi gure Motion
Zone with Motion Detection
Feature disabled?

• Yes. Motion Zone can be confi gured independently of whether or not Motion Detection

Feature is in use.

A motion event took place but
didn’t trigger an alarm.

• Check alarm output port settings.

«
...
65
66
67
68
69
...
»

Содержание SNC-C7478









































































Отзывы:

Нет отзывов

Похожие инструкции для SNC-C7478

Бренд: Ziginte Страницы: 18

Бренд: jacarta Страницы: 4

Split Vision VSLR3

Бренд: Federal Signal Corporation Страницы: 4

Multi Gas Clip Simple Plus

Бренд: Gas Clip Technologies Страницы: 20

Бренд: Q-See Страницы: 141

Бренд: Q-See Страницы: 12

Бренд: ratiotec Страницы: 28

Бренд: Lorex Страницы: 2

Бренд: XNET Страницы: 23

Wi-Corporate Controller

Бренд: GSD Страницы: 14

Esprit 738 EXPRESS

Бренд: Paradox Страницы: 36

Бренд: Santec Страницы: 8

Бренд: Commell Страницы: 13

ENFORCER E-964-Q165Q

Бренд: SECO-LARM Страницы: 12

Бренд: GST Страницы: 2

PluraSens E2638-HFC

Бренд: Evikon Страницы: 22

Бренд: hager Страницы: 2

Бренд: XtendLan Страницы: 34

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды