Call Functions 55
Placing a Call on Hold
You can place the current call on hold at any point during a
conversation. You can also make another call while you have a
call in progress if your network supports this service.
1.
While on a call, tap
Hold
. This action places the
current caller on hold (which is displayed on-screen as a
greyed-out box).
2.
You can later reactivate this call by tapping
Unhold
.
To make a new call while you have a call in progress
1.
Tap
Hold
.
2.
Tap
Add call
to display the dialer.
3.
Enter the new number and tap
.
Once connected, the active call will appear in a large box
in the middle of your screen and the call on hold will
appear in a small box in the upper right corner of your
screen.
Switching Between Calls
When you have an active call and a call on hold, you may switch
between the two calls, changing the one on hold to active and
placing the other on hold.
1.
Tap
Swap
.
The current call (caller #2) is placed on hold and the
previous call on hold (caller #1) is then reactivated so that
you can continue conversing with that person. The active
call will appear in a green box.
2.
Tap
to end the currently active call.
To end a specific call
1.
Tap
Swap
until the call you want to end appears in
a green box.
2.
Tap
to end the specific call.
3.
Tap
to end the remaining call.
To answer a call while you have a call in progress
1.
Tap
and slide to the right to answer another call.
2.
Tap an option from the on-screen menu:
• Put xxx on hold
to place the previous caller on hold while you
answer the new incoming call.
• End xxx
to end the previous call and answer the new call.
Swap
Swap
Swap
Swap
