34
Wiring work
Specification for circuit breaker and power supply cord
f
Power supply cord is not supplied with air conditioner.
f
Select the power supply cord in accordance with relevant local and national regulations.
f
Wire size must comply with the applicable local and national code.
f
The appliance shall be provided with a certified power supply cord and interconnection cord complying with the national
regulations of the countries in which the appliance is to be sold.
f
Power supply cords of parts of appliances for outdoor use shall not be lighter than polychloroprene sheathed flexible
cord. (Code designation IEC : 60245 IEC 57 / CENELEC : H05RN-F)
Model
Voltage
MCA
MFA
S
sc
value (MVA)
AM040
✴
XMDEH
1phase, 220~240V/50Hz
22
32
(Note1)
AM050
✴
XMDEH
24
32
(Note1)
AM060
✴
XMDEH
32
40
(Note1)
(Note1)
Equipment complying with IEC 61000-3-12.
Model
Voltage
MCA
MFA
S
sc
value (MVA)
(Note2)
AM040
✴
XMDGH
3phase,
380~415V/50Hz
10
20
3.3
AM050
✴
XMDGH
12
20
3.3
AM060
✴
XMDGH
12
20
3.3
(Note2)
This equipment complies with IEC 61000-3-12 provided that the short-circuit power S
sc
is greater than or equal
to S
sc
value at the interface point between the user’s supply and the public system. It is the responsibility of the
installer or user of the equipment to ensure, by consultation with distribution network operator if necessary, that the
equipment is connected only to a supply with a short-circuit power S
sc
greater than or equal to S
sc
value.
Tightening power terminal
f
Connect the cables to the terminal board using the compressed ring terminal.
f
Use rated cables only.
f
Connect the cables with driver and wrench that can apply the rated torque to the screws.
f
Make sure that appropriate tightening torque is applied for cable connection. If the terminal is loose, arc heat may occur
and cause fire and if the terminal is connected too firmly, terminal may get damaged.
5JHIUFOJOHUPSRVF LHGtDN
M4
12.0~18.0
Communication : F1, F2
3 phase AC power: 1(L), 2(N), L, N, L1(R), L2(S), L3(T), N
M5
20.0~30.0
1 phase AC power : 1(L), 2(N), L, N
