Samsung OfficeServ SMT-I5220 Скачать руководство пользователя страница 219

Страница: 219 / 626

INTERCOM CALLS

VOICE ANNOUNCE MODE

When another station calls you, your keyset will sound a brief attention tone and
you will hear the caller’s announcement.

•

Press the

Speaker

button to turn on the microphone and speak handsfree—

—lift the handset to reply.

•

To finish the call, replace the handset or press the

Speaker

button.

NOTE: In order for C.O. calls to be answered handsfree, AUTO ANS CO must be set
to ON.

AUTO ANSWER MODE

When another station calls you, your keyset will sound a brief attention tone and
then automatically answer the call.

•

Your microphone and speaker are turned on and you can speak handsfree. For
privacy, use the handset.

•

To finish the call, replace the handset.

NOTE: In order for C.O. calls to be answered handsfree, AUTO ANS CO must be set
to ON.

CALLING YOUR SYSTEM OPERATOR

•

Dial

to call your system operator or group of operators.

•

If you want to call a specific operator, dial that person’s extension number.

NOTE: If the Hot keypad feature has been turned off, you must first lift the handset
or press the

Speaker

button or dial

before you begin dialing.

CALL PROCESSING

SYSTEM HOLD

When you are connected to any call, press

Hold

. The call will flash at the keyset. If

this call appears on a line button at other keysets, it will flash at those keysets also.

•

To take the caller off hold, press that button and the flashing LED will go
steady again. Resume the conversation—

—press the

Hold

button. The

flashing LED will go steady again and you will be connected to the call again.
Resume the conversation.

NOTE: While on a call, pressing a line button, route button or flashing

Call

button

will automatically put your first call on hold and connect you to the new call.

See

Automatic Hold under Customizing Your Keyset.

EXCLUSIVE HOLD

To place an outside call on hold at your phone so that other users cannot get it:

•

Press the

Hold

button twice.The call will flash on your keyset and this line will

show a steady indication on other keysets.

•

To retrieve the call, press the flashing line button or press the

Hold

button a

third time.

NOTE: Intercom calls will always be placed on exclusive hold.

REMOTE HOLD

When you wish to place a call on hold at another station.

•

Press

Transfer

and dial the station number (or press the appropriate

DSS

but-

ton)

•

Press the

Hold

button. This will place the call on system hold on an available

Call

button or Line button at the remote station and return you to dial tone.

NOTES:
1. If the destination station does not have any free

Call

buttons or line buttons

you will hear No More Calls tone and must return to the other party by press-
ing the

Transfer

button.

2. Intercom calls cannot be put on remote hold.

Home Page

Содержание OfficeServ SMT-I5220



















































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание OfficeServ SMT-I5220

Отзывы:

Бренды по названию

Популярные бренды

Samsung OfficeServ SMT-I5220, Руководство пользователя

Результаты поиска

Содержание OfficeServ SMT-I5220

Отзывы:

Бренды по названию

Популярные бренды