Wireless network setup
157
2. Using a Network-Connected Machine
Connecting WPS
Factory default in your machine is
PBC
mode, which is recommended for a
typical wireless network environment.
Connecting in PBC mode
1
Press the
(
Menu
) button on the control panel and select
Network
.
2
Press
Wi-Fi
.
3
Press
WPS
>
PBC
.
4
Press the
WPS (PBC)
button on the access point (or wireless router).
5
Follow the instruction on the display screen.
The messages are displayed on the display screen.
Connecting in PIN mode
1
Press the
(
Menu
) button on the control panel and select
Network.
2
Press
Wi-Fi
.
3
Press
WPS
>
PIN
.
4
The eight-digit PIN appears on the display.
You need to enter the eight-digit PIN within two minutes on the
computer that is connected to the access point (or wireless router).
You need to enter the PIN from the computer to connect to the access point
(or wireless router) varies depending on the access point (or wireless router)
you are using. Refer to the user's guide of the access point (or wireless
router) you are using.
5
Follow the instruction on the display screen.
The messages are displayed on the display screen.
Содержание Multifunction Xpress C48 series
