Media and tray
35
2. Learning the basic usage
•
Be sure the seam at both ends of the envelope extends all the
way to the corner of the envelope.
1
Acceptable
2
Unacceptable
•
Envelopes with a peel-off adhesive strip or with more than one
flap that folds over to seal must use adhesives compatible with
the machine’s fusing temperature for 0.1 second (about 170°C
(338 °F)). The extra flaps and strips might cause wrinkling,
creasing, or jams, and may even damage the fuser.
•
For the best print quality, position margins no closer than 15 mm
from the edges of the envelope.
•
Avoid printing over the area where the envelope’s seams meet.
Transparency
To avoid damaging the machine, use only transparencies designed
for use in laser printers.
•
Must withstand the machine’s fusing temperature.
•
Place them on a flat surface after removing them from the
machine.
•
Do not leave unused transparencies in the paper tray for long.
Dust and dirt may accumulate on them, resulting in spotty
printing.
•
To avoid smudging caused by fingerprints, handle them
carefully.
•
To avoid fading, do not expose printed transparencies to
prolonged sunlight.
•
Ensure that transparencies are not wrinkled, curled, or have any
torn edges.
1
2
Содержание ML-3750ND
Страница 51: ...Redistributing toner 51 3 Maintenance 4 Close the front cover Ensure that the cover is securely closed...
Страница 94: ...Regulatory information 94 5 Appendix 20 China only...
Страница 124: ...Layout 29 3 Useful setting menus Landscape Stapling Position Selects the location of the staple Item Description...
