Samsung MIM-D01AUN, Руководство пользователя

Страница: 9 / 180

E-
9
X
Windows 7 or later version
X
Install Internet Explorer 11 or later version
X
Install Silverlight 2.0 or later version
Web Browser Specification
Note
X
Visit internet homepage (http://www.microsoft.com/silverlight/) to download
Silverlight. Or you can download it through the download link which is noticed
automatically when the PC is connected to the Internet and you access to DMS2.5
for the first time.
X
Silverlight operates normally with Windows 7 or later version.
It may not operate normally with former version of Windows.
All settings of DMS2.5 will be arranged in web page which built in DMS2.5.
You should access to DMS2.5 IP to use DMS2.5 web page.
There are 2 ways to access DMS2.5 IP.
(For about settings, refer to installation manual.)
X
Static IP setting
X
Dynamic IP(DHCP) setting
X
Basically, only Private IP can be set to IP address. To use Public IP, you must set Enable
public IP as ‘Enable’ from the menu [System Settings]
£
[System environment setting].
- Private IP range: 10.0.0.0 ~ 10.255.255.255, 172.16.0.0 ~ 172.31.255.255,
192.168.0.0 ~ 192.168.255.255
Computer Settings for DMS2.5 Connection
X
For devices that support new communication, you must set the communication mode
of the channel to 'NEW' from [System settings
£
Tracking] menu. Set of Indoor/outdoor
units, with conventional communication type, cannot be connected to DMS2.5 with new
communication.
X
When 'NEW' is set as communication mode of the channel, virtual OnOff controller
address will be assigned.
(Channel 0: Virtual OnOff controller 11, Channel 1: Virtual OnOff controller 12,
Channel 2: Virtual OnOff controller 13, Channel 3: Virtual OnOff controller 14,
Channel 4: Virtual OnOff controller 15)
X
The maximum number of indoor units that can be connected to each communication
channel of DMS2.5 RS485 is 128.
X
Use this product only in a separate dedicated network.
Samsung electronics is not liable for any problems caused
by connecting it to the Internet or an intranet.