Samsung MIM-D01AUN, Руководство пользователя

Страница: 128 / 180

E-
128
Note
X
Factory setting is as follows.
1. IP address: 192.168.0.100
2. Subnet mask address: 255.255.255.0
3. Default gateway : 192.168.0.1
4. DNS server: 0.0.0.0
X
DMS2.5 sets service engineer IP(192.168.0.254)
internally. Therefore, it should be available all the time
regardless of current IP setting.
X
DMS2.5 gets DHCP IP address when you activate DHCP
function. When connecting DMS2.5 to S-NET series,
you can connect them using the IP. However the DHCP
IP address can be changed by events such as network
environment of restart.
In this case, it may cause communication failure
between S-NET series and DMS2.5. Therefore it is not
recommended to connect DMS2.5 using DHCP address
using S-NET series.
X
You can check network information on external LCD of
DMS2.5 when activating DHCP. (Refer to page 162)
X
When DHCP is set, address from DHCP server will be set
as DMS2.5 IP address.
X
DHCP function is not available when you use BACnet
Gateway function.
This product must be used in a dedicated network
because it cannot respond to network attacks such as
hacking and viruses. When it is connected to the Internet
or an intranet (ex: an office LAN), it could be a risk of
illegal approach. Also, this may change it to a harmful
connection for other network devices. This is not the
responsibility of Samsung Electronics and not included
in compensation for the damage.
System Settings (Continued)