Samsung iDCS 500, Руководство по программированию

Страница: 412 / 533

iDCS 500 PROGRAMMING
TECHNICAL MANUAL PART 2 AUGUST 2003
MMC: 851
ALM
CODE
ALARM DEFINITION
MJB06 IPC MSGQ Under
IPC TX queue full error has occurred in the MCP.
Alarm data = IPC Queue type
(MCP-LAN, MCP-SCP, MCP-LCP1, MCP-LCP2)
MJB07 Task MSGQ Over
Task MSG queue full error has occurred in the MCP.
Alarm data = Error Task Kind
(CNFG, ERRH, NPER, MSGH, DIGH, SMART, CALL, PPER,
SMDR, TMMC, IDLE)
MJB07 Task MSGQ Under
Task MSG queue full error has occurred in the MCP.
Alarm data = Error Task Kind
(CNFG, ERRH, NPER, MSGH, DIGH, SMART, CALL, PPER,
SMDR, TMMC, IDLE)
MJC01 DTMF Fault
An abnormal interrupt has occurred in the system DTMF
resources.
Alarm data = DTMF Receiver number
(MCP BASE, MCP OPT:1, MCP OPT:2, MCP OPT:3, C#2 BASE,
C#2 OPT:1, C#2 OPT:2, C#2 OPT:3, C#3 BASE, C#3 OPT:1,
C#3 OPT:2, C#3 OPT:3)
MJC02 Tone Fault
An abnormal interrupt has occurred in the system tone
resources. IE busy, ringback, error, no more calls, etc.
Alarm data = TONE Receiver number
(MCP BASE, MCP OPT:1, MCP OPT:2, MCP OPT:3, C#2 BASE,
C#2 OPT:1, C#2 OPT:2, C#2 OPT:3, C#3 BASE, C#3 OPT:1,
C#3 OPT:2, C#3 OPT:3)
MJC10 AA-DTMF Fault
An abnormal fault reported in one of the systems AA card DTMF
resources.
MJC11 AA-MFR Rec
An abnormal fault reported in one of the systems AA card DTMF
resources has recovered.
Alarm data = Cabinet, Slot, Port (Cx-Syy-Pzz)
MJC12 E911 Restart
The E911 card has restarted.
Alarm data = Cabinet, Slot (Cx-Syy)
MJC13 E911 Block
The E911 card has restarted because the system detect the card
does not work correctly.
Alarm data = Cabinet, Slot (Cx-Syy)
MJC14 VoIP Restart
The ITM3 card has restarted.
Alarm data = Cabinet, Slot (Cx-Syy)
MJC15 VoIP Block
The ITM3 card has restarted because the system detect the card
does not work correctly.
Alarm data = Cabinet, Slot (Cx, Syy)
MJD01 Sync Failure Clocking on TEPRI cards has become asynchronous.
HOME
PAGE
Table of
Contents
HELP