Samsung iDCS 500, Руководство по программированию

Страница: 188 / 533

iDCS 500 PROGRAMMING
TECHNICAL MANUAL PART 2 SEPTEMBER 2003
MMC: 501
AUTO REDIAL INT This timer controls the time between attempts after RETRY
dialing is set on a station.
AUTO REDIAL RLS This timer controls the duration of a Ring No Answer
condition on a retry number dialed before the auto redial is
automatically canceled.
CALLBACK NO ANS This timer controls the time before the callback is
automatically canceled when a callback detects Ring No
Answer.
CAMP ON RECALL This timer controls the duration of time a camped-on call will
stay at a destination before recalling to the transferring
station.
CID DISPLAY TIME The amount of time that the Caller ID information remains on
the keyset’s display.
CID MSG RECEIVE The amount of time that the system will allow a valid
message from the C.O.
C.O.-C.O. DISCONNECT This timer monitors the duration of an unsupervised
conference; when it expires, both trunks are disconnected.
CONFIRM TONE TIME The tone heard when a feature is activated or deactivated.
CRD TONE INT TM This is the call record tone interval time. An entry other than
zero will cause a tone to be heard by all the parties in a
recorded conversation. The range for the tone is 001 (every
second) to 255 (every 255 seconds). A value of 000 means
no tone. Requires SVMi-8 card.
DIAL PASS TIME This timer monitors the duration of time before connecting
the transmit of the keyset to the trunk side of an outgoing
call.
DISA DTMF DETECT This timer sets the time duration that DTMF can be received
on a DISA line.
DISA DISCONNECT This timer controls the maximum duration of a DISA call.
DISA LOCK OUT TIMER This timer controls the duration of time a DISA call is not
allowed to be made after the DISA error counter has expired
(MMC 500).
DISA PASS CHECK This timer defines the time period before the system clears
the incorrect passcode counter.
HELP
Table of
Contents
HOME
PAGE