Samsung iDCS 500, Руководство по программированию

Страница: 183 / 533

iDCS 500 PROGRAMMING
TECHNICAL MANUAL PART 2 SEPTEMBER 2003
MMC: 500
SYSTEM-WIDE COUNTERS
DESCRIPTION:
Used to set the values of the system counters. The counters are listed below with a
brief description of each.
0 ALARM REM. CNTER The number of times that an alarm reminder will ring
a station before cancelling. RANGE = 1-99. (Also
used for wake up calls).
1 AUTO RDL COUNTER The number of times the system will redial an outside
number after the auto redial feature has been
activated. RANGE = 1-99.
2 DISA CALL COUNTER
Sets the maximum number of intercom calls that can
be made after accessing a DISA line. RANGE = 1-99.
3 DISA LOCK CENTER
Number of attempts the system will allow to
incorrectly access a DISA line before locking out the
DISA line. RANGE =1-99
4 NEW CALL COUNTER
Number of times the system will allow a user to signal
New Call on a C.O. line during one call.
RANGE = 1-99.
5 UCDS VISUAL ALARM Used to set the Visual alarm threshold. It is triggered
when the number of calls waiting to be answered in
the UCD group reaches this value. RANGE = 0-25.
6 UCDS AUDIO ALARM Used to set the Audio alarm threshold. It is triggered
when the number of calls waiting to be answered in
the UCD group reaches this value. RANGE = 0-25.
7 UCD CS LEVEL 1 Provides call wait indication level 1 if number of calls
waiting to be answered in UCD group reaches this
value. RANGE = 0-25.
8 UCD CS LEVEL 2
Provides call wait indication level 2 if number of calls
waiting to be answered in UCD group reaches this
value. RANGE = 0-25.
HELP
Table of
Contents
HOME
PAGE