38
◈ Wired - Manual
If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings parameters manually.
Follow Steps 1 and 2 in Wired Network, and then follow these steps:
1.
Select
Network Status
. The Smart Media Player searches for a network, and then displays the connection failed message.
2.
On the bottom of the screen, select
IP Settings
, and then press the
E
button. The IP Settings screen appears.
3.
Select the
IP Setting
field, and then press the
E
button.
4.
Select
Enter manually
in the IP Setting field, and then press the
E
button.
5.
Select a parameter to enter (IP Address, for example), and then press the
E
button.
Use the number keypad on your remote control to enter the numbers for the parameter. You can also enter numbers using the
▲▼
buttons. Use the
◀▶
buttons on the remote control to move from entry field to entry field within a parameter. When done with one parameter, press the
E
button.
6.
Press the
▲
or
▼
button to move to another parameter, and then enter the numbers for that parameter following the instructions in Step 5.
7.
Repeat Steps 5 and 6 until you have filled in all parameters.
▶
You can get the Network parameters from your Internet
provider.
8.
When finished entering all the parameters, select
OK
, and then press the
E
button. The Smart Media Player verifies the network connection and then
connects to the network.
Wireless Network
You can setup a wireless network connection in four ways:
●
Wireless Automatic
●
Wireless Manual
●
WPS(PBC)
●
WPS(PIN)
When you configure the wireless network connection, any wireless network devices currently connected through the Smart Media Player or, if applicable,
the product's current wired connection, will be disconnected.
Settings
h
Network
