23
14.
Select
Close
, and then press the
E
button. The Connect RF Cable
screen appears.
15.
If you have not installed a CableCARD and not connected a Tuning Adaptor,
go to Step 16. If you have installed a CableCARD, but have not connected
a Tuning Adaptor, go to Step 18. If you have installed a CableCARD and
connected a Tuning Adapter, go to Step 19.
16.
If you have not connected the
RF cable from your cable outlet
to your product, do it now. Once
you have connected the cable,
press the
▶
button, and then
press the
E
button. If you have
already connected the RF cable,
press the
▶
button, and then
press the
E
button.
▶
The RF cable connects your product to the video transmissions from your
cable company. If you don’t use an RF cable, select “I don’t use an RF cable”
at the bottom of the screen, and then go to Step 26. Note that without an
RF cable connection, you won’t be able to watch TV broadcasts.
If you have no network or have not connected the product to your
network, go to Step 23.
e
e
duct t
t t t
o t
h
he
video transmissions from
your
17.
If your cable company provided a
CableCARD, insert the card into
the slot on the back of the Smart
Media Player. The “CableCARD is
inserted” message appears. Press
the
E
button, and then go to
Step 18. If your CableCARD is
already installed, press the
E
button, and then go to Step 18. If
you did not get a CableCARD or
want to use your product without
a CableCARD, select "I don't use
a CableCARD". Then, press the
E
button, and go to Step 23.
f
18.
If your cable company provided
a Tuning Adapter (SDV), and you
have not connected it, connect it
to the Smart Media Player now.
When done, press the
▶
button,
and then press the
E
button.
The Zip Code screen appears. For
additional information about the
the Tuning Adapter, refer to the
users manual provided by your
Cable Service Provider.
▶
Do not connect the USB
cable to the Tuning Adapter
and the Smart Media Player
until after the Tuning Adapter
LED light is solid.
u
t
,
r
e
19.
Enter your Zip Code into the Zip
Code field using the number
buttons on the remote. If you
make a mistake, press the
◀
button to delete the mistake.
When done, press the
E
button.
20.
In the list that appears, select
your cable provider, and then
press the
E
button. The
Confirmation window appears.
21.
Press the
E
button to confirm
the information is correct.
Settings
h
The Setup Procedure
