Samsung GEMS-H Скачать руководство пользователя

Страница: 76 / 79

SAIT‐IFU‐GEMS‐H Rev.1.1 (2019‐11)

Page 76 of 79

LTE Band 1,2,4,25

UMTS

2400 – 2570 MHz

Bluetooth

WLAN

802.11b/g/n

RFID 2450

LTE Band 7

Pulse modulation

217 Hz

28 V/m

5100 – 5800 MHz

WLAN 802.11a/n

Pulse modulation

217 Hz

9 V/m

NOTE : These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures,

objects and people.

For some services, only the uplink frequencies are included.

10.3. FCC

10.3.1. FCC Compliance Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

10.3.2 FCC Interference Statement

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense. Change or

modifications not expressly approved by the party responsible for compliance could void the user’s authority to

operate the equipment under FCC rules.

10.3.3 FCC Caution

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's

authority to operate this equipment. This transmitter must not be co‐located or operating in conjunction with any

other antenna or transmitter.

10.3.4 FCC Radiation Exposure Statement

This

equipment

complies with RF exposure requirements set forth for an uncontrolled environment.

Содержание GEMS-H
















































































Результаты поиска

Содержание GEMS-H

Отзывы:

Похожие инструкции для GEMS-H

Бренды по названию

Популярные бренды

Samsung GEMS-H, Инструкция по эксплуатации

Результаты поиска

Содержание GEMS-H

Отзывы:

Похожие инструкции для GEMS-H

Бренды по названию

Популярные бренды