Samsung GEMS-H Скачать руководство пользователя страница 29

Страница: 29 / 79

SAIT‐IFU‐GEMS‐H Rev.1.1 (2019‐11)

Page 29 of 79

5.7. Check prior to use/operation of the device

5.7.1. Check for before use

①

Check that the screws for adjusting the hip width of the waist part are not loose.

②

Check that the thigh support frame fastening hook and strap Velcro are securely fastened.

③

Use the device after it is fully charged. Monitor the battery level and if the battery level is below 20 %, charge

the device before use.

5.7.2. Check for any discomfort while walking

①

Before turning the device on, make the wearer walk around to check for any discomfort. If there is discomfort,

reposition the device or try donning the device again. You may need to readjust the width of the waist part or

the waist belt tightness.

②

Confirm with the patient that there is no pinching of the skin. If the patient is comfortable then the

measurement is acceptable.

③

Check if the greater trochanter area is making contact with the hard surface of the device. This could cause

discomfort after walking for some time. If this is the case, the device width may need to be widened.

④

Avoid wearing the device with short pants where the skin is exposed to the thigh support strap area. When

walking a long time, this could cause skin chafing.

Содержание GEMS-H
















































































Результаты поиска

Содержание GEMS-H

Отзывы:

Бренды по названию

Популярные бренды

Samsung GEMS-H, Инструкция по эксплуатации

Результаты поиска

Содержание GEMS-H

Отзывы:

Бренды по названию

Популярные бренды