Samsung GEMS-H Скачать руководство пользователя

Страница: 72 / 79

SAIT‐IFU‐GEMS‐H Rev.1.1 (2019‐11)

Page 72 of 79

10.2. EMC (Electromagnetic Compatibility)

Risk of serious injury due to radiation!

Use of this equipment adjacent to or stacked with other equipment should be avoided because it could result

in improper operation. If such use is necessary, this equipment and the other equipment should be observed

to verify that they are operating normally.

Risk of serious injury due to radiation!

Use of accessories, transducers and cables other than those specified or provided by the manufacturer of this

equipment could result in increased electromagnetic emissions or decreased electromagnetic immunity of this

equipment and result in improper operation.

Risk of serious injury due to radiation!

Portable RF communications equipment (including peripherals such as antenna cables and external antennas)

should be used no closer than 30 cm (12 inches) to any part of the GEMS‐H, including cables specified by the

manufacturer. Otherwise, degradation of the performance of this equipment could result.

Risk of serious injury due to radiation!

If you are going to have an X‐ray, CT scan, MRI, or be exposed to other types of radiation, remove the GEMS‐H,

and leave them outside the radiation area. The GEMS‐H is designed and tested to tolerate common

electromagnetic interference.

The EMISSIONS characteristics of this equipment make it suitable for use in industrial areas and hospitals (CISPR

11 class A). If it is used in a residential environment (for which CISPR 11 class B is normally required) this

equipment might not offer adequate protection to radio‐frequency communication services. The user might

need to take mitigation measures, such as relocating or re‐orienting the equipment.

Содержание GEMS-H
















































































Результаты поиска

Содержание GEMS-H

Отзывы:

Похожие инструкции для GEMS-H

Бренды по названию

Популярные бренды

Samsung GEMS-H, Инструкция по эксплуатации

Результаты поиска

Содержание GEMS-H

Отзывы:

Похожие инструкции для GEMS-H

Бренды по названию

Популярные бренды