• Call accessories
: allows you to assign headset settings during
incoming calls.
–
Automatic answering
configures the device to automatically
answer and incoming call when a headset is detected.
–
Automatic answering timer
configures the time delay before
the device automatically accepts the incoming call.
–
Outgoing call conditions
configures the connected Bluetooth
device to make outbound calls within one of two settings: Even
when device locked or Only when device unlocked.
• Extra volume on calls
: activating this feature places an extra
volume button on your currently active call screen.
• Increase volume in pocket
: increases the ringtone volume
when the device is in a pocket or a bag. Uses the proximity
sensor to detect its location.
• Call forwarding
: configures call forwarding options.
• Additional settings
: allows you to configure additional call
settings. For more information, refer to
“Configuring
Additional Voice Call Settings”
on page
232
.
• Voicemail service
: allows you to assign the service.
• Voicemail settings
: displays the settings for the voicemail.
• Ringtone
: assigns your device’s ringtone.
• Vibrate
: configures the vibrate settings. Choose from Always,
Only in silent mode, or Never.
• TTY mode
: allows you to configure the TTY settings. For more
information, refer to
“TTY Mode”
on page
235
.
• Hearing aids
: allows you to enable/disable hearing aid
compatibility. For more information, refer to
“HAC Mode”
on page
235
.
• Use Internet calling
: allows you to configure the incoming call
and SIP account information.
Call rejection
1.
From the main
Call settings
page, tap
Call rejection
.
2.
Activate the feature by moving the
Auto reject mode
slider to the right.
3.
Tap
Auto reject mode
and tap one of the following
options:
• All numbers
: to reject all calls.
• Auto reject numbers
: to reject all calls in your Reject list.
Changing Your Settings
228