DSB-9601C
GB-32
DSB-9601C
GB
GB-33
5. Common Interface
This STB is equipped with two PCMCIA slots, which enable the
use of two CI-CAMS.
When a Common Interface CAM is inserted inside the PCMCIA
slot, the system detects the type of the CAM automatically and
display in the main menu.
On choosing this menu, you will be able to access the different
options available with the type of the CAM like authorizations,
pre-booking, package details etc.,
N
No
otte
e
:
The menu differs according to each inserted CAM.
If the module has not been installed yet, the phase “Not Installed” will be accordingly
indicated.
6. HDD/VCR Mode
Your PVR temporarily saves the present program you are watching on the embedded hard disk
drive. Therefore, you can enjoy some effects similar to the VCR playback functions. You can
conveniently play or pause the program which is being broadcasted.
6.1 TimeShifting
When you have paused a program, there occurs a time difference between the program you are
watching and the live program that is being broadcasted.
It is as much as the time that the pause mode has continued.
●
TimeShift mode gets operable when you press the
PAUSE
key on Live screen.
●
TimeShift duration and total available TimeShift size are
displayed on the right of the progress bar on the bottom of
the screen, and a still image of a live channel is displayed.
●
A text ‘TimeShift’ is displayed on the top right corner on the
screen, and ‘TIME’ on the seven segments of the set.
●
Resume playback of the program from the point where the
program has been interrupted of playing by pressing the
PLAY
key on the initial standby screen.
●
Operation of PVR functions (
FF
,
REW
,
PAUSE
and
STOP
) is available after the playback.
●
If the playback point precedes the current broadcasting point by FF of PVR function, PLAY of
PVR function automatically operates.
●
Exit TimeShift mode by key operation of
/
/
EXIT
/
STOP
/
POWER
/
MENU
.
N
No
otte
e
:
The timeshift available time depends on the free space of HDD. It can reach from
minimum ten minutes to maximum five hours. To operate HDD, at least a space of ten
minutes should be left in HDD.
P
E
R
S
O
N
A
L
V
I
D
E
O
R
E
C
O
R
D
E
R
C
O
M
M
O
N
I
N
T
E
R
F
A
C
E
4.5 System Information
If you have to contact your service provider or a service center
they might ask for information available from this menu.
Place the cursor on this sub menu and press the
OK
key.
4.6 Software Upgrade
You can download and upgrade the software of this
STB
through
ASTRA, Sirius and Hotbird satellite when the new software is
released.
During downloading don’t turn off the
STB
.
If there is a new version of software to download, you are asked
if you will update or not. If you press the
OK
key, the update
starts right away.
In case update is impossible, you get this message
“
You can’t update software!
” Or in case you don’t need to
update, “
You don’t need to update software!
” will be displayed.
If you get information that a Transponder is changed to different one for Samsung software,
you should select ‘User Advanced Mode’ at Menu mode by using
/
keys. Then you should
set exact parameters for the new transponder for Samsung.
During inserting any CAM, you may have distorted video or audio. It doesn't mean STB is wrong.
N
No
otte
e
:
Upgraded satellite channels may be added or changed. Contact your dealer for further
information.
4.7 Satellite Connection
Set a connection type in accordance with connection with a
satellite dish.
4.8 Reset to Factory Defaults
This to restore the factory set values in case the user has
encountered some problems after changing any values of channel
data and others which may be in error.
●
Enter the PINCode.
The screen display will be as follows:
At the request window, if you press the
OK
key, the receiver will
be reset to factory default settings automatically.
N
No
otte
e
:
This cause your previous settings to be deleted!
Contents stored in a hard disk drive are not eliminated.
OPERATING THE RECEIVER
OPERATING THE RECEIVER
DSB-9601C_GB_4.0 6/17/03 5:22 PM Page 32
Содержание DSB-9601C
