Samsung DS 24D Скачать руководство пользователя страница 82

Страница: 82 / 131

SAVE NUMBER WITH REDIAL

To save the number you have just dialed for later use:

• Before hanging up, hookflash, receive confirmation tone and dial

To redial this saved number at any time:

• Lift the handset and dial

. This step will select the same line and dial

the number for you.

This telephone number is stored in memory until you save another. When
you do, the new number will be saved and the old number will be erased.

NOTE: Save Number does not apply to intercom calls.

PULSE TO TONE CHANGEOVER

When making an outside call on a dial pulse line, press

. All digits dialed

after the

will be sent as tones.

PAGING AND MESSAGING

MAKING AN INTERNAL PAGE

To make an announcement through the keyset speakers:

• Lift the handset.
• Dial

plus zone number

1, 2, 3

4—OR—

dial

plus

to page all

internal zones.

• After the brief attention tone, make the announcement.

MAKING AN EXTERNAL PAGE

To make an announcement through the external paging speakers:

• Lift the handset.
• Dial

plus

to make an external page.

• After the brief attention tone, make the announcement.

ALL PAGE

To page all keysets and the external speakers at the same time:

• Lift the handset and dial

plus

✱

• After the brief attention tone, make the announcement.

MEET ME PAGE/ANSWER

• Make a page by dialing

plus any zone and instruct the paged per-

son to dial

• After completing the page, hookflash and remain off-hook until the

paged person dials

from any phone. The paged person will be au-

tomatically connected with you.

CALL PARK AND PAGE

When you have an outside call for someone who is not at his/her desk, you
can park the call and page the requested party:

• While in conversation, hookflash and dial

. The call is automatically

parked at your station.

• Dial the desired page zone and make the announcement. Be sure to

include your station number, for example, “Mr. Smith, park 201.”

Home Page

Standard Telephone

Table of Contents

Содержание DS 24D




































































































































Результаты поиска

Содержание DS 24D

Отзывы:

Похожие инструкции для DS 24D

Бренды по названию

Популярные бренды

Samsung DS 24D, Инструкция пользователя

Результаты поиска

Содержание DS 24D

Отзывы:

Похожие инструкции для DS 24D

Бренды по названию

Популярные бренды