CALLING YOUR SYSTEM OPERATOR
•
Dial
0
to call your system operator or group of operators.
•
If you want to call a specific operator, dial that person’s extension num-
ber.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the
handset or press the
SPEAKER
key before you begin dialing.
15
BUSY STATION CALLBACK
When you call another station and receive a busy signal:
•
Press the
CBK
key, if programmed, or dial
44
.
•
When the busy station becomes free, your keyset will ring.
•
Lift the handset or press
ANS/RLS
to call the now idle station.
NOTES:
1.
A callback will be canceled if not answered within 30 seconds. If you
have set a callback, your
CBK
key will light.
2.
If the Hot Keypad feature has been turned off, you must first lift the hand-
set or press the
SPEAKER
key before dialing.
BUSY STATION CAMP-ON
When you call another station and receive a busy signal but you do not want
to wait for a callback:
MANUAL CAMP-ON
•
Press the
CAMP
key or dial
45
.
•
The called station will receive off-hook ring tone repeated every few sec-
onds and its first available
CALL
button will flash green to indicate your
call is waiting.
•
Wait for the called party to answer.
•
The called station must release its first call or place it on hold before
answering your camp-on.
NOTES:
1.
If you receive No More Calls tone, that station has no available key to
accept your call. Hang up or leave a message.
2.
If the Hot Keypad feature has been turned off, you must first lift the hand-
set or press the
SPEAKER
key before dialing.
14
Home Page
Table of Contents
iDCS Keyset