ENGLISH
66
66
Connecting to a TV which has no Audio/Video Input Jacks
✤
You can connect your Camcorder to a TV through a VCR.
1. Connect the Camcorder to your VCR with the Audio/Video Cable.
■
The yellow jack: Video
■
The white jack: Audio(L) - Mono
■
The red jack: Audio(R)
2. Connect a TV to the VCR.
3. Set the
[Power]
switch to
[PLAYER]
.
4. Set the
[Mode]
switch to
[TAPE]
. (VP-D375W(i)/D975W(i) only)
5. Turn on both the TV and VCR.
■
Set the input selector on the VCR to Line.
■
Select the channel reserved for your VCR on the TV set.
6. Play the tape.
Playback
1. Connect a power source and set the
[Power]
switch to
[PLAYER]
.
2. Set the
[Mode]
switch to
[TAPE]
. (VP-D375W(i)/D975W(i) only)
3. Insert the tape you wish to play back.
4. Using the
[
œ
œœ
œ
(REW)]
/
[
√
√√
√
(FF)]
buttons, find the first position you wish to play back.
5. Press the
[
√
√
❙❙
(PLAY/STILL)]
button.
■
The images you recorded will appear on the TV after a few seconds.
■
If a tape reaches its end while being played back, the tape will rewind automatically.
[ Notes ]
■
The playback mode (SP/LP) is selected automatically.
■
If only a mono audio input is available on the TV set, use the audio cable with the white jack (Audio L).
Playback
Antenna
Audio/Video
Cable
Signal flow
TV
VCR
Camcorder
Audio/Video
Cable
VP-D371(i)/D371W(i)/
D372WH(i)
VP-D375W(i)/D975W(i)
œ
œ
01227G VPD371 UK~071 2/1/07 12:04 PM Page 66