Voice Service 140
• Contacts
: Lets you look up and display contact information for any name
stored in your Contacts list by saying the name. (For more information,
refer to
“Finding a Contacts Entry”
on page 65.)
• Redial
: Redials the last number dialed.
• Help
: Shows a description of Voice Commands.
Note:
Speaking clearly, say the command that you want to use. If, after a few
seconds, the device has not recognized a command, it prompts you to
repeat the command. If, after a few more seconds, it still has not
recognized a command, it tells you “Sorry, no match found,” and cancels
voice recognition.
Voice Command Tips:
•
Make sure you wait for the beep before speaking.
•
Speak clearly at a normal volume, as if you were talking on the phone.
Voice-Activating Your Contacts List
When you first start Voice Service, it reads your Contacts list and
voice-activates all the names stored there. When you have add or
change contacts, Voice Service automatically reloads and voice-
activates the entire list.
Ending Calls Before Restarting the Voice Service Software
When you use Voice Service to make a call, you must end that call
before you can use Voice Service again.