EB 5573 EN
9
Operation
2
Operation
The controller is ready for use with the default temperatures and operating schedules. On
start-up, the current time and date need to be set at the controller (see section 2.5).
2.1
Operating controls
The operating controls are located in the front panel of the controller.
2.1.1
Rotary pushbutton
*
Rotary pushbutton
Turn [
q
]:
Select readings, parameters and function blocks.
Press [
Û
]:
Confirm adjusted selection or settings.
2.1.2
Rotary switch
The rotary switch is used to set the operating mode and the relevant parameters for each
control circuit.
Information level, normal switch position
Operating modes
Manual level
Day set point (rated room temperature, DHW temperature)
Night set point (reduced room temperature, DHW
temperature sustaining value)
Times-of-use for heating/DHW
Party mode
Controller time
Parameter and configuration level
