The time stamp [Date], [Time] is added by the text messaging center, not by the controller. If
an error message is transmitted via the device bus to a controller equipped with a dial-up
modem, the serial number of the faulty controller is transmitted, not that of the “modem
controller“. A detailed error alarm is not available.
When the Modbus is activated and, at the same time, the dial-up in case of error is released,
the connection with the GLT is established first, and then the text message is sent. If the first
attempt to connect to the GLT fails, the controller tries again until the set number of redialing
attempts has been exhausted.
4
The
Access number
for the German D1 network by Deutsche Telekom (tAPnr) currently is
0171 252 1002 (add 0 in front when dialing from a private branch exchange).
4
The
Mobile phone number
must be entered as follows: 49 xxx yyyyyy, where xxx stands
for 160, 171 or any other valid D1 dialing code and yyyyyy represents the specific phone
number of the mobile you wish the error alarm to be sent to.
Note!
Currently, text messages can only be sent to the German D1 network.
Functions
WE
Configuration
Text message via SMS
0
CO6 -> F08 - 1
Modem function
0
CO6 -> F03 - 1
Automatic modem configuration
0
CO6 -> F04 - 1
Parameters
*
WE
Parameter level / Range of values
Modem dialing pause (P)
5 min
PA6 / 0 to 255 min
Modem time-out (t)
5 min
PA6 / 1 to 255 min
No. of redialing attempts (C)
5
PA6 / 1 to 255
Access number (tAPnr)
–
PA6 / Max. 22 characters; 1, 2, 3, …, 9, 0;
“-“ end of a string; “P“ pause
Mobile phone number (HAndy)
–
PA6 / Max. 22 characters; 1, 2, 3, …, 9, 0;
“-“ end of a string; “P“ pause
* –> section 9.3 (“Description of communication parameters to be adjusted“)
EB 5576 EN
91
Operational faults
[Date]
[Time]
[Phone no. of the controller]
Controller error
TROVIS 5576 # [serial no. of the faulty controller]
