1.4
Displaying data
The time, date, public holidays and vacation periods as well as the temperatures measured
by the connected sensors and their set points can be retrieved and displayed with the help of
the rotary pushbutton.
Note!
Data can also be viewed in the
manual mode.
To do so, select
Info
, confirm and proceed as described below.
Proceed as follows:
q
Select value.
Depending on the configuration of the controller, the different data points are dis-
played:
__:__ Time
Room temperature, heating circuits 1, 2
Outdoor temperature, heating circuits 1, 2
Temperature at flow sensor VF, heating circuits 1, 2
Temperature at flow sensor VF1, primary heat exchanger circuit
Temperature at flow sensor VF2, DHW circuit
Temperature at solar collector sensor VF3
Temperature at return flow sensor RüF
Temperature at storage tank sensor SF1
Temperature at storage tank sensor SF2
Temperature at storage tank sensor SF3
Temperature at flow sensor VF4
Compare the set point/limit value and the actual value.
Press the rotary pushbutton to display the date when the time is displayed.
10
EB 5576 EN
Operation
