Samson TROVIS 5431, Монтаж и эксплуатация

Страница: 7 / 102

3 Operation
For an easier understanding of how to oper-
ate this controller, please unfold the last page
of these “Mounting and operating instruc-
tions”! Switches and keys are used to oper-
ate the controller. You can access them by
opening the transparent front door. Use
switch (B) to change operating modes. Use
switch (A) and keys (E) and (F) to prompt
parameters such as temperature and setpoint
as well as to determine the selectable
controller functions and parameters. This will
take you to different levels which are
described in chapter 3.3. All the entered set-
tings and the information you require are rep-
resented by symbols in the display (D).
You have the option of feeding the controller
with configuration and parameterization
data using a memory pen (see chapter 6).
The individual switches and keys as well as
the operation on the different levels are
described in the following chapters.
3.1 Operating controls on the front panel
3.1.1 Control switch (A)
Use this switch to prompt several temperature
values and set the most important
parameters.
For a detailed description on the functions of
this switch, refer to the Quick Guide
KA 5431 EN.
Displays outdoor temperature
Displays flow and return flow temper-
ature of the heating circuit
Displays storage temperature and
charging temperature of the drinking
water circuit depending on the config-
uration
Displays and changes the time and
date
Displays and changes the parameters
of the heating circuit , depending on
the configuration
Displays and changes the time sched-
ule of the heating circuit
Displays and changes the parameters
of the drinking water circuit , depend-
ing on the configuration
Standard operation via menus ,
operation via arrow and enter keys,
see chapter 3.3.
EB 5431 EN
7
Operation