Samson TROVIS 5431, Монтаж и эксплуатация

Страница: 27 / 102

Accessing a CO level (from the operating level)
Set the control switch (A) to this
symbol!
Press the arrow key until the display
indicates COPA!
Press the enter key! NR and 0
appear in the display. Here, you
are expected to enter the code num-
ber.
or Use the arrow keys to set the code
number!
Press the enter key to acknowledge
the code number! PA1 appears on
the display if you entered the cor-
rect code number.
or Use the arrow keys to select CO1,
CO2 or CO-SYS!
NOTE: When CO1, CO2 and
CO-SYS appear on the display, the
top part of the display shows you
which function blocks are active
(black squares on the right below
the number).
Acknowledge using the enter key!
The first function block appears.
Changing function blocks
Access the CO level as described
above!
or Continue to press the arrow key
until the required function block Fxx
appears!
Press the enter key, activating the
function block. The function block
now blinks in the display, i. e. you
can now change it.
or
To activate the function block, press
the arrow key .
To deactivate the function block,
press the arrow key .
Press the enter key and acknowl-
edge this setting! Depending on
how the function block is set, a
square appears in the display on
the top right below the F number (F
is activated) or it disappears (F is
deactivated). In addition, either the
next function block appears in the
display or a function block parame-
ter. Changing function block
parameters works the same as
changing parameters on the PA lev-
els, like this:
(if req.) Press the enter key to activate the
function block parameter. The dis-
play should now indicate at least
one blinking symbol.
or Use the arrow keys to set the new
value.
Press the enter key to acknowledge
the new value. The next function
block parameter or ‘End’ appears
on the display.
Change the next function block parameter as
described, or exit the function block when
‘End’ appears on the display by pressing .
If necessary, edit more function blocks as
described, or exit the CO level as folllows!
EB 5431 EN
27
Operation