Samson EB 31a-23, Монтаж и эксплуатация

Страница: 21 / 64

6-1
EB 31a-23_EN
Edition: November 2021
Speci
fi cations subject to change
Start-up
6 Start-up
The work described in this section is only to be performed by ful-
ly trained and quali
fi ed personnel.
Risk of personal injury during actuator air exhaust!
In case of pneumatic version the actuator is operated with air. As
a result, air is exhausted during operation.
Ö
Install the air exhaust components in such a way that exhaust
ports are not located at eye level and the actuator does not
discharge at eye level in the work position.
Ö
Use suitable silencers and vent plugs.
Ö
Wear eye and hearing protection when working near the ac-
tuator.
Risk of personal injury through incorrect operation, use or in-
stallation as a result of information on the actuator being illegi-
ble!
Over time, markings, labels and nameplates on the actuator may
become covered with dirt or become illegible in some other way.
As a result, hazards may go unnoticed and the necessary in-
structions not followed. There is a risk of personal injury.
Ö
Keep all relevant markings and inscriptions on the device in a
constantly legible state.
Ö
Immediately renew damaged, missing or incorrect name-
plates or labels.
Ö
Verify the compatibility and connect the actuator to the pres-
sure supply line and/or to the control system, if any, with
fi t-
tings and pipes as per actuator model and plant speci fi ca-
tions.
WARNING