Samson 5007-2 Series, Монтаж и эксплуатация

Страница: 5 / 72

EB 9511 EN 1-1
Safety instructions and measures
1 Safety instructions and measures
Intended use
The modular SAM Connect Gateway allows the input of signals (4 to 20 mA), for example
issued by external transmitters. Furthermore, the integrated GSM module allows remote data
transmission.
The device is designed to operate under exactly defined conditions (e.g. supply voltage,
temperature). Therefore, operators must ensure that the device is only used in operating
conditions that meet the specifications used for sizing the device at the ordering stage.
SAMSON does not assume any liability for damage resulting from the failure to use the
device for its intended purpose or for damage caused by external forces or any other
external factors.
Î
Refer to the technical data for limits and fields of application as well as possible uses.
Reasonably foreseeable misuse
The SAM Connect Gateway is not suitable for the following applications:
− Use outside the limits defined during sizing and by the technical data
Furthermore, the following activities do not comply with the intended use:
− Use of non-original spare parts
− Performing maintenance activities not described in these instructions
Qualifications of operating personnel
The device must be mounted, started up and serviced by fully trained and qualified personnel
only; the accepted industry codes and practices are to be observed. According to these
mounting and operating instructions, trained personnel refers to individuals who are able to
judge the work they are assigned to and recognize possible hazards due to their specialized
training, their knowledge and experience as well as their knowledge of the applicable
standards.
Personal protective equipment
No personal protective equipment is required for the direct handling of the SAM Connect
Gateway. Work in the plant may be necessary that requires personal protective equipment.
Î
Check with the plant operator for details on personal protective equipment.