Samson 5007-2 Series, Монтаж и эксплуатация

Страница: 43 / 72

EB 9510 EN 8-1
Operation
8 Operation
The work described in this section is only to
be performed by personnel appropriately
qualified to carry out such tasks.
8.1 Remote data transmission
The remote data transmission can only be
used when a GSM module is installed.
To use remote data transmission, SAMSON
creates a user account for each customer in
the SAM TANK MANAGEMENT web inter -
face. All devices are added to the account
by SAMSON.
Î
Contact SAMSON's After-sales Service
for details on how to register in SAM
TANK MANAGEMENT.
8.1.1 Status LEDs of the GSM
module
Table 8-1 below describes the meaning of
the LEDs.
8.1.2 Improving the signal
quality
The signal strength can be indicated by the
LEDs on the GSM module. Proceed as fol -
lows:
1.
Press the service key on the GSM module
and hold for three seconds (see Fig. 8-1).
2. The LEDs indicate the signal strength.
Values in Table 8-2 apply.
Aligning the antenna
Move the antenna to the upright position for
the best reception results. If a weather guard
or other housing parts are located directly
above the device due to the mounting situa-
tion, tilt the antenna slightly (see Fig. 8-2).
If the signal is poor in the location where the
device is installed, an external mobile net
-
work antenna with SMA connection (com -
monly available mobile network accessories)
can be used.
Note
Note